English- Home
- Stock Categories
- Technical Articles
- Danfoss Shut-off valves
- Rexroth Piston Pump
- DENISON vane pump
Home>Products>BOSCH injector>BOSCH 0445110263 injector
BOSCH 0445110263 injector
category
BOSCH injector
BOSCH 0445110263 SPECIFICATIONS
What are the dimensions of a BOSCH 0445110263 injector? BOSCH injector Manufacturing Service . Get Your 54 kN Basic static load rating C0 Free, Instant Quote！ ShanDong Manufacturing CO., LTD.
- BOSCH
0445110263
- RLM1815
- 18x25x15
- 18
- 25
- 15
- 18 mm
- 25 mm
- 15 mm
-
ShanDong Manufacturing CO., LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
BOSCH 0445110263 injectorSystems
- 0,5 mm
- 0,019 Kg
- 11,5 kN
- 14,3 kN
- 12000 r/min
- RLM1815
- 1
- 25
- 15
- ecat_NSMRNR
- 12000
- 0.5
- 14.3
- 15
- 23
- 10.8
- NRB_S_RLM
- 18
- 2.5
- 15
- RLM1815
- 21
- 20000
- 20.5
- 0.5
- 8312
- 0.019
BOSCH 0445110263 BOSCH 0445110263 injectorDetails
BOSCH 0445110263 injector Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | D | d | Minimum Buy Quantity | Inventory | B | UNSPSC | Weight | |
| Gear Pump | 30 mm | 10 mm | N/A | 0.0 | ||||
| Shoe Plates | 11.125 Inch | 282.575 Millimeter | 0 Inch | 0 Millimeter | N/A | 0.0 | ||||
| Piston Sets | 1.937 Inch | 49.2 Millimeter | 1.5 Inch | 38.1 Millimeter | N/A | 0.0 | ||||
| Plunger Sliding Boots | 2.047 Inch | 52 Millimeter | 0.984 Inch | 25 Millimeter | N/A | 0.0 | ||||
| Separator | 3.937 Inch | 100 Millimeter | 1.772 Inch | 45 Millimeter | N/A | 0.0 | ||||
| Spindle | 0,73 kg / Weight | Plain Spherical Radial | N/A | 0.0 | ||||
| Swing | 8.465 Inch | 215 Millimeter | 3.937 Inch | 100 Millimeter | N/A | 0.0 | ||||
| Cylinder | Shaft Mount | 500 N/mm² | N/A | 0.0 | ||||
| Shafts | Standard | 0,73 kg / Weight | N/A | 0.0 | ||||
| Skeleton Oil Seal | 100 mm | 55 mm | 9 mm | 37500 N | ||||
| Block Springs | 55 mm | 35 mm | 100MM Bore; 215MM Outside Diameter; 47MM Width; Open; Yes Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring | 31171529 | ||||
| Inclined Plate | 24 mm | Triple Lip Seals | 31 mm | Bronze | ||||
| Regulator | 130 mm | 50 mm | 24 | Plain Bearings Spherical Radial | ||||
| Servo Piston | Small | 8.4 | 0.787 Inch | 20 Millimeter | 3.937 Inch | 100 Millimeter | ||||
| BOSCH 0445110083 injector | Maximum Permissible Pilot Pressure:RLM1815; Maximum angular acceleration:18x25x15; Pilot Pressure:18; Torque:25; Pressurefree Operation:15; Maximum rotational speed:18 mm; Control Fluid Drain:25 mm; Rate Of Pressure Change:15 mm; Weight (approx.):0,5 mm; Maximum Torque:0,019 Kg; Control Pressure Measurement:11,5 kN; Determining Operating Characteristics:14,3 kN; Nominal Resistance:12000 r/min; Maximum Permissible Speed (limit Speed):RLM1815; Flow:1; Drive Power:25; Case volume:15; Maximum Volume Flow:ecat_NSMRNR; Rotary stiffness:12000; Voltage:0.5; Sequence Valve:14.3; Drive Speed:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110069 injector | Maximum Axial Force At Standstill:RLM1815; Control Fluid Drain:18x25x15; Displacement, geometric, per revolution:18; Control Pressure Measurement:25; Maximum Torque:15; Maximum rotational speed:18 mm; Voltage:25 mm; Drive Power:15 mm; Moment of inertia rotary group:0,5 mm; Maximum Permissible Speed (limit Speed):0,019 Kg; Maximum Permissible Pilot Pressure:11,5 kN; Pressurefree Operation:14,3 kN; Determining Operating Characteristics:12000 r/min; Maximum Volume Flow:RLM1815; Sequence Valve:1; Rate Of Pressure Change:25; Power:15; Pilot Pressure:ecat_NSMRNR; Torque:12000; Drive Speed:0.5; Load Pressure:14.3; Nominal Resistance:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110084 injector | Sequence Valve:RLM1815; Voltage:18x25x15; Maximum rotational speed:18; Pilot Pressure:25; Maximum Torque:15; Pressurefree Operation:18 mm; Load Pressure:25 mm; Displacement, geometric, per revolution:15 mm; Moment of inertia rotary group:0,5 mm; Control Fluid Drain:0,019 Kg; Control Pressure Measurement:11,5 kN; Flow:14,3 kN; Maximum Permissible Speed (limit Speed):12000 r/min; Drive Speed:RLM1815; Torque:1; Power:25; Maximum angular acceleration:15; Rotary stiffness:ecat_NSMRNR; Maximum Permissible Pilot Pressure:12000; Maximum Axial Force At Standstill:0.5; Maximum Volume Flow:14.3; Nominal Resistance:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110072 injector | Flow:RLM1815; Maximum Permissible Pilot Pressure:18x25x15; Maximum rotational speed:18; Nominal Resistance:25; Displacement, geometric, per revolution:15; Load Pressure:18 mm; Determining Operating Characteristics:25 mm; Maximum Permissible Speed (limit Speed):15 mm; Weight (approx.):0,5 mm; Drive Power:0,019 Kg; Maximum Axial Force At Standstill:11,5 kN; Pilot Pressure:14,3 kN; Torque:12000 r/min; Voltage:RLM1815; Maximum Torque:1; Rate Of Pressure Change:25; Moment of inertia rotary group:15; Power:ecat_NSMRNR; Pressurefree Operation:12000; Sequence Valve:0.5; Control Pressure Measurement:14.3; Drive Speed:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110244 injector | Pilot Pressure:RLM1815; Flow:18x25x15; Maximum angular acceleration:18; Maximum Axial Force At Standstill:25; Maximum rotational speed:15; Determining Operating Characteristics:18 mm; Case volume:25 mm; Drive Speed:15 mm; Rate Of Pressure Change:0,5 mm; Maximum Torque:0,019 Kg; Drive Power:11,5 kN; Moment of inertia rotary group:14,3 kN; Pressurefree Operation:12000 r/min; Displacement, geometric, per revolution:RLM1815; Load Pressure:1; Nominal Resistance:25; Control Pressure Measurement:15; Maximum Permissible Speed (limit Speed):ecat_NSMRNR; Sequence Valve:12000; Voltage:0.5; Rotary stiffness:14.3; Maximum Permissible Pilot Pressure:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110185 injector | Determining Operating Characteristics:RLM1815; Load Pressure:18x25x15; Drive Power:18; Control Pressure Measurement:25; Case volume:15; Moment of inertia rotary group:18 mm; Maximum Permissible Speed (limit Speed):25 mm; Maximum angular acceleration:15 mm; Sequence Valve:0,5 mm; Maximum Axial Force At Standstill:0,019 Kg; Control Fluid Drain:11,5 kN; Weight (approx.):14,3 kN; Maximum Volume Flow:12000 r/min; Torque:RLM1815; Power:1; Pilot Pressure:25; Rate Of Pressure Change:15; Maximum Torque:ecat_NSMRNR; Maximum rotational speed:12000; Maximum Permissible Pilot Pressure:0.5; Nominal Resistance:14.3; Drive Speed:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110071 injector | Control Pressure Measurement:RLM1815; Nominal Resistance:18x25x15; Displacement, geometric, per revolution:18; Load Pressure:25; Torque:15; Maximum Volume Flow:18 mm; Power:25 mm; Flow:15 mm; Determining Operating Characteristics:0,5 mm; Sequence Valve:0,019 Kg; Drive Speed:11,5 kN; Maximum Permissible Pilot Pressure:14,3 kN; Pressurefree Operation:12000 r/min; Case volume:RLM1815; Rotary stiffness:1; Rate Of Pressure Change:25; Control Fluid Drain:15; Maximum Torque:ecat_NSMRNR; Maximum rotational speed:12000; Voltage:0.5; Moment of inertia rotary group:14.3; Pilot Pressure:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110081 injector | Maximum rotational speed:RLM1815; Determining Operating Characteristics:18x25x15; Drive Power:18; Maximum Permissible Speed (limit Speed):25; Rotary stiffness:15; Moment of inertia rotary group:18 mm; Control Fluid Drain:25 mm; Sequence Valve:15 mm; Power:0,5 mm; Drive Speed:0,019 Kg; Maximum Volume Flow:11,5 kN; Pilot Pressure:14,3 kN; Maximum Torque:12000 r/min; Maximum Axial Force At Standstill:RLM1815; Displacement, geometric, per revolution:1; Load Pressure:25; Flow:15; Control Pressure Measurement:ecat_NSMRNR; Weight (approx.):12000; Nominal Resistance:0.5; Pressurefree Operation:14.3; Maximum Permissible Pilot Pressure:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110283 injector | Case volume:RLM1815; Torque:18x25x15; Maximum Permissible Pilot Pressure:18; Maximum angular acceleration:25; Nominal Resistance:15; Moment of inertia rotary group:18 mm; Drive Power:25 mm; Maximum Permissible Speed (limit Speed):15 mm; Control Pressure Measurement:0,5 mm; Power:0,019 Kg; Rate Of Pressure Change:11,5 kN; Determining Operating Characteristics:14,3 kN; Pilot Pressure:12000 r/min; Weight (approx.):RLM1815; Load Pressure:1; Maximum Volume Flow:25; Rotary stiffness:15; Voltage:ecat_NSMRNR; Displacement, geometric, per revolution:12000; Maximum rotational speed:0.5; Drive Speed:14.3; Maximum Torque:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
| BOSCH 0445110067 injector | Determining Operating Characteristics:RLM1815; Weight (approx.):18x25x15; Load Pressure:18; Maximum Torque:25; Case volume:15; Maximum Axial Force At Standstill:18 mm; Rate Of Pressure Change:25 mm; Maximum Volume Flow:15 mm; Flow:0,5 mm; Sequence Valve:0,019 Kg; Torque:11,5 kN; Nominal Resistance:14,3 kN; Moment of inertia rotary group:12000 r/min; Pilot Pressure:RLM1815; Rotary stiffness:1; Voltage:25; Control Fluid Drain:15; Control Pressure Measurement:ecat_NSMRNR; Maximum rotational speed:12000; Drive Power:0.5; Drive Speed:14.3; Maximum angular acceleration:15; DE_:23; SLR:10.8; Prod_Type3:NRB_S_RLM; d:18; DA_:2.5; Z_:15; SI:0; yobi:RLM1815; da_max:21; OIL rpm:20000; SDM_:20.5; r:0.5; KBRG:8312; mass1:0.019; |
Contact Us
- ShanDong Manufacturing CO., LTD.
- AddressLiXia District, Jinan City, Shandong Province, China
BOSCH 0445110263 Technical Articles
| How do you test the flow of a hydraulic pump? |
| Which pump has highest volumetric efficiency? |
| Why are hydraulic cylinders cushioned? |
BOSCH injector CATEGORIES
- Danfoss Shut-off valves
- Rexroth Piston Pump
- DENISON vane pump
- PAKER Piston Pump
- Yuken pressure valve
- Yuken Piston pump
- Yuken Double Vane pump
- Yuken single Vane pump
- Rexroth Vane pump
- Rexroth Solenoid directional valve
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Rexroth check valve
- HYUNDAI injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
BOSCH 0445110185 injector
BOSCH 0445110283 injector
BOSCH 0445110244 injector
BOSCH 0445110072 injector
BOSCH 0445110071 injector