Home>Products>Rexroth check valve>Rexroth M-SR30KE check valve
Rexroth M-SR30KE check valve
category
Rexroth check valve
Rexroth M-SR30KE SPECIFICATIONS
Rexroth M-SR30KE check valve Product Brochures , Rexroth check valve Manufacturing Service . 70x125x24 Tamaño (MM) Get Your Free.
- Rexroth
M-SR30KE
- 2220
- 100x180x46
- 100
- 180
- 46
- 100 mm
- 180 mm
- 46 mm
- ShanDong Manufacturing CO., LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth M-SR30KE check valveDetails of
- 46 mm
- 2,1 mm
- 111 mm
- 169 mm
- 2 mm
- 4,53 Kg
- 94,5 kN
- 38,5 kN
- 3 200 r/min
- 3 800 r/min
- 0,27
- 2,5
- 3,7
- 10.83
- 2.4
- 2220
- 1
- 140
- 180
- 3.7
- 18
- 46
- ecat_NSSAB
- 3800
- 2.5
- 4.51
- 2
- 3200
- 0.08
- 119.345
- 169
- 38.5
- 162.835
- 1
- SABB_SA_CB
- 1
- 111
- 0.65
- 0.27
- 2220
- 2.1
- 1354
- 10.085
- 20.638
Rexroth M-SR30KE Code systemRexroth M-SR30KE check valve
Rexroth M-SR30KE check valve Parts list | ||||||||
---|---|---|---|---|---|---|---|---|
No. | d | D | Weight | Inventory | B | Minimum Buy Quantity | C | |
Spindle | 30 mm | 55 mm | 0,085 Kg | 0.0 | ||||
Back Plate | 100 mm | 0.206 | 36,9 Kg | Female Threaded | ||||
Swash Plate Assemblies | No | 37.0000 mm | - | 0.0 | ||||
Valve Plates | 141 | 8482.10.50.68 | 1.95 | 0.0 | ||||
Housings Casings | 20 | 0.128 | 34.5 | 0.0 | ||||
Rod | M14 x 1.5 | 360mm | 0.01 | 0.0 | ||||
Central Shaft | 0.984 Inch | 25 Millimeter | 2.047 Inch | 52 Millimeter | 0.128 | 0.0 | ||||
Cylinder Block | 14 mm | http://www.koyousa.com | 0.354 Inch | 9 Millimeter | 1.00 mm | ||||
Oil Distribution Plate | 240mm | 360mm | R1/8 | 150 mm | ||||
Skeleton Oil Seal | 12.000 mm | 37.0000 mm | Ball Bearing | 11,2 kN | ||||
Piston Shoe | 400 mm | 540 mm | Open Type | 24-1/2 Shaft Dia | ||||
Oil Distribution Disc Plug | 20 mm | 32 mm | Steel | 1.95 | ||||
Bearings | 12.00 mm | Bearing | Stainless Steel Garter | 15.2 |
Rexroth 4WMM6E.J.H.5X/F check valve | Torque:2220; Displacement, geometric, per revolution:100x180x46; Pilot Pressure:100; Drive Power:180; Maximum rotational speed:46; Flow:100 mm; Weight (approx.):180 mm; Maximum Permissible Speed (limit Speed):46 mm; Maximum Torque:46 mm; Maximum angular acceleration:2,1 mm; Control Fluid Drain:111 mm; Nominal Resistance:169 mm; Rotary stiffness:2 mm; Control Pressure Measurement:4,53 Kg; Maximum Volume Flow:94,5 kN; Determining Operating Characteristics:38,5 kN; Moment of inertia rotary group:3 200 r/min; Power:3 800 r/min; Load Pressure:0,27; Maximum Axial Force At Standstill:2,5; Case volume:3,7; Voltage:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth 4WMM6......./V check valve | Maximum angular acceleration:2220; Maximum rotational speed:100x180x46; Pressurefree Operation:100; Nominal Resistance:180; Pilot Pressure:46; Rate Of Pressure Change:100 mm; Flow:180 mm; Maximum Permissible Pilot Pressure:46 mm; Sequence Valve:46 mm; Torque:2,1 mm; Rotary stiffness:111 mm; Maximum Permissible Speed (limit Speed):169 mm; Drive Power:2 mm; Control Pressure Measurement:4,53 Kg; Maximum Axial Force At Standstill:94,5 kN; Moment of inertia rotary group:38,5 kN; Control Fluid Drain:3 200 r/min; Load Pressure:3 800 r/min; Power:0,27; Weight (approx.):2,5; Drive Speed:3,7; Maximum Volume Flow:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth SV30GB1-4X/ check valve | Rate Of Pressure Change:2220; Power:100x180x46; Moment of inertia rotary group:100; Load Pressure:180; Weight (approx.):46; Determining Operating Characteristics:100 mm; Maximum angular acceleration:180 mm; Case volume:46 mm; Maximum Volume Flow:46 mm; Nominal Resistance:2,1 mm; Torque:111 mm; Maximum Axial Force At Standstill:169 mm; Rotary stiffness:2 mm; Displacement, geometric, per revolution:4,53 Kg; Maximum Permissible Pilot Pressure:94,5 kN; Maximum Permissible Speed (limit Speed):38,5 kN; Maximum Torque:3 200 r/min; Pressurefree Operation:3 800 r/min; Pilot Pressure:0,27; Voltage:2,5; Flow:3,7; Maximum rotational speed:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth 4WMM6E.J.H.5X/ check valve | Case volume:2220; Power:100x180x46; Drive Speed:100; Voltage:180; Maximum angular acceleration:46; Displacement, geometric, per revolution:100 mm; Moment of inertia rotary group:180 mm; Weight (approx.):46 mm; Torque:46 mm; Maximum rotational speed:2,1 mm; Flow:111 mm; Control Fluid Drain:169 mm; Sequence Valve:2 mm; Maximum Torque:4,53 Kg; Control Pressure Measurement:94,5 kN; Nominal Resistance:38,5 kN; Pilot Pressure:3 200 r/min; Rate Of Pressure Change:3 800 r/min; Maximum Volume Flow:0,27; Pressurefree Operation:2,5; Maximum Axial Force At Standstill:3,7; Drive Power:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/F check valve | Voltage:2220; Rotary stiffness:100x180x46; Maximum Torque:100; Maximum Permissible Pilot Pressure:180; Drive Power:46; Power:100 mm; Drive Speed:180 mm; Maximum rotational speed:46 mm; Maximum Volume Flow:46 mm; Sequence Valve:2,1 mm; Load Pressure:111 mm; Pilot Pressure:169 mm; Maximum angular acceleration:2 mm; Weight (approx.):4,53 Kg; Maximum Axial Force At Standstill:94,5 kN; Pressurefree Operation:38,5 kN; Case volume:3 200 r/min; Control Pressure Measurement:3 800 r/min; Nominal Resistance:0,27; Rate Of Pressure Change:2,5; Determining Operating Characteristics:3,7; Control Fluid Drain:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth 4WMM6A.B.C.D.Y5X/ check valve | Voltage:2220; Sequence Valve:100x180x46; Torque:100; Rotary stiffness:180; Maximum Volume Flow:46; Case volume:100 mm; Flow:180 mm; Displacement, geometric, per revolution:46 mm; Weight (approx.):46 mm; Pressurefree Operation:2,1 mm; Moment of inertia rotary group:111 mm; Determining Operating Characteristics:169 mm; Load Pressure:2 mm; Control Fluid Drain:4,53 Kg; Drive Power:94,5 kN; Maximum Axial Force At Standstill:38,5 kN; Control Pressure Measurement:3 200 r/min; Maximum Torque:3 800 r/min; Drive Speed:0,27; Maximum Permissible Speed (limit Speed):2,5; Maximum Permissible Pilot Pressure:3,7; Maximum rotational speed:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth WMM6A.B.C.D.Y5X/F check valve | Moment of inertia rotary group:2220; Power:100x180x46; Maximum Volume Flow:100; Pressurefree Operation:180; Control Fluid Drain:46; Displacement, geometric, per revolution:100 mm; Torque:180 mm; Maximum Permissible Pilot Pressure:46 mm; Pilot Pressure:46 mm; Nominal Resistance:2,1 mm; Flow:111 mm; Rotary stiffness:169 mm; Weight (approx.):2 mm; Maximum rotational speed:4,53 Kg; Rate Of Pressure Change:94,5 kN; Voltage:38,5 kN; Determining Operating Characteristics:3 200 r/min; Maximum angular acceleration:3 800 r/min; Maximum Permissible Speed (limit Speed):0,27; Control Pressure Measurement:2,5; Drive Speed:3,7; Maximum Torque:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth WMM6.........5X/....../B10 B12 B15 check valve | Maximum rotational speed:2220; Displacement, geometric, per revolution:100x180x46; Determining Operating Characteristics:100; Drive Speed:180; Weight (approx.):46; Maximum Volume Flow:100 mm; Flow:180 mm; Control Pressure Measurement:46 mm; Drive Power:46 mm; Maximum angular acceleration:2,1 mm; Maximum Permissible Speed (limit Speed):111 mm; Nominal Resistance:169 mm; Control Fluid Drain:2 mm; Rotary stiffness:4,53 Kg; Power:94,5 kN; Pressurefree Operation:38,5 kN; Pilot Pressure:3 200 r/min; Torque:3 800 r/min; Sequence Valve:0,27; Maximum Axial Force At Standstill:2,5; Load Pressure:3,7; Maximum Permissible Pilot Pressure:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/ check valve | Control Fluid Drain:2220; Torque:100x180x46; Control Pressure Measurement:100; Power:180; Maximum Torque:46; Rate Of Pressure Change:100 mm; Maximum Permissible Speed (limit Speed):180 mm; Maximum rotational speed:46 mm; Displacement, geometric, per revolution:46 mm; Drive Speed:2,1 mm; Maximum Volume Flow:111 mm; Voltage:169 mm; Drive Power:2 mm; Case volume:4,53 Kg; Pressurefree Operation:94,5 kN; Moment of inertia rotary group:38,5 kN; Nominal Resistance:3 200 r/min; Rotary stiffness:3 800 r/min; Maximum Permissible Pilot Pressure:0,27; Weight (approx.):2,5; Pilot Pressure:3,7; Sequence Valve:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Rexroth SL30GB1-4X/ check valve | Maximum rotational speed:2220; Displacement, geometric, per revolution:100x180x46; Rate Of Pressure Change:100; Maximum Volume Flow:180; Pilot Pressure:46; Maximum Axial Force At Standstill:100 mm; Sequence Valve:180 mm; Maximum Permissible Speed (limit Speed):46 mm; Moment of inertia rotary group:46 mm; Flow:2,1 mm; Case volume:111 mm; Control Pressure Measurement:169 mm; Torque:2 mm; Maximum Permissible Pilot Pressure:4,53 Kg; Rotary stiffness:94,5 kN; Determining Operating Characteristics:38,5 kN; Load Pressure:3 200 r/min; Power:3 800 r/min; Pressurefree Operation:0,27; Maximum angular acceleration:2,5; Control Fluid Drain:3,7; Drive Power:10.83; Y3:2.4; hidYobi:2220; LangID:1; PCD:140; D_:180; Y2:3.7; SREX:0; cyl count:18; B_:46; hidTable:ecat_NSSAB; Oil rpm:3800; SRE:0; Y0:2.5; mass:4.51; ra:2; GRS rpm:3200; SRIX:0.08; groove inner:119.345; D_a:169; SRIN:0; C0:38.5; groove outer:162.835; SREN:0; X0:1; Prod_Type3:SABB_SA_CB; X1:1; da:111; X2:0.65; e:0.27; yobi:2220; r:2.1; KBRG:1354; CAng:10.085; cyl dia:20.638; |
Contact Us
- ShanDong Manufacturing CO., LTD.
- AddressLiXia District, Jinan City, Shandong Province, China
Rexroth M-SR30KE Technical Articles
How do you test the flow of a hydraulic pump? |
Which pump has highest volumetric efficiency? |
Why are hydraulic cylinders cushioned? |
Rexroth check valve CATEGORIES
- Danfoss Shut-off valves
- Rexroth Piston Pump
- DENISON vane pump
- PAKER Piston Pump
- Yuken pressure valve
- Yuken Piston pump
- Yuken Double Vane pump
- Yuken single Vane pump
- Rexroth Vane pump
- Rexroth Solenoid directional valve
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Rexroth check valve
- HYUNDAI injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector