English- Home
- Stock Categories
- Technical Articles
- Danfoss Shut-off valves
- Rexroth Piston Pump
- DENISON vane pump
Home>Products>Rexroth Vane pump>Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump
Rexroth R901085400 PVV52-1X/162-055RB15DDMC MODELS
Need a CAD or 3D Model?
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump
category
Rexroth Vane pump
Rexroth R901085400 PVV52-1X/162-055RB15DDMC SPECIFICATIONS
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump 825 kN номинальное значение основной динамической нагрузки (с) Engineering Calculator , Rexroth Vane pump 460 mm d Manufacturing Service . Get Your Free.
- Rexroth
R901085400 PVV52-1X/162-055RB15DDMC
- PCM 161810 E
- 16x18x10
- 16
- 18
- 10
- 16 mm
- 18 mm
- 10 mm
-
ShanDong Manufacturing CO., LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product featuresRexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump
- 0,1 mm
- 0,2 mm
- – mm
- 0,0039 Kg
- 12,9 kN
- 0.1 mm
- 0.6 mm
- 0.2 mm
- 1 mm
- 20 °
- f7
- H7
- 12.9 kN
- 40 kN
- 80 N/mm²
- 250 N/mm²
- 480
- 0 m/s
- 2 m/s
- 0.03
- 0.25
- 0.0039 kg
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Specifications Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cylinder Block | 440 mm | 4490 kN | 680 mm | 172 Kg | ||||
| Bearing Plate | 75 mm | 31,5 kN | 115 mm | 0,68 Kg | ||||
| The Thrust Plate | Insert Bearing Unit | J7 | 23-5/8 in | 0.107 | ||||
| Cylinder | Solid | 1320 rpm | Four-Bolt Plummer Block | - | ||||
| Gear Pump | 7.612 in | 0,0026 Kg | Nitrile | 4016.93.50.20 | ||||
| Cylinder Blocks | 13 000 r/min | 108 mm | Pillow Type | 16 in | ||||
| Back Plate | 20 | SH44M | 31411705 | 31,5 kN | ||||
| Skeleton Oil Seal | 210 mm | 127 mm | 380 mm | Cast Iron | ||||
| Oil Distribution Disc Plug | 9 | 5.1 | 3 mm | No | ||||
| The Ball Hinge Spring | No | Steel | 350 | 4490 kN | ||||
| Rexroth PVV2-1X/045RA15DMB Vane pump | Displacement, geometric, per revolution:PCM 161810 E; Maximum Volume Flow:16x18x10; Determining Operating Characteristics:16; Weight (approx.):18; Drive Power:10; Sequence Valve:16 mm; Moment of inertia rotary group:18 mm; Case volume:10 mm; Flow:0,1 mm; Maximum angular acceleration:0,2 mm; Pressurefree Operation:– mm; Rate Of Pressure Change:0,0039 Kg; Maximum Permissible Speed (limit Speed):12,9 kN; Rotary stiffness:0.1 mm; Drive Speed:0.6 mm; Power:0.2 mm; Control Pressure Measurement:1 mm; Maximum rotational speed:20 °; Nominal Resistance:f7; Load Pressure:H7; Maximum Axial Force At Standstill:12.9 kN; Maximum Torque:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV1-1X/036RA15DMB Vane pump | Torque:PCM 161810 E; Control Fluid Drain:16x18x10; Voltage:16; Moment of inertia rotary group:18; Weight (approx.):10; Flow:16 mm; Maximum Permissible Speed (limit Speed):18 mm; Pilot Pressure:10 mm; Determining Operating Characteristics:0,1 mm; Power:0,2 mm; Maximum angular acceleration:– mm; Maximum Torque:0,0039 Kg; Sequence Valve:12,9 kN; Load Pressure:0.1 mm; Drive Speed:0.6 mm; Displacement, geometric, per revolution:0.2 mm; Maximum Permissible Pilot Pressure:1 mm; Maximum Axial Force At Standstill:20 °; Control Pressure Measurement:f7; Maximum rotational speed:H7; Rate Of Pressure Change:12.9 kN; Drive Power:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV2-1X/068RB15UMB Vane pump | Pilot Pressure:PCM 161810 E; Weight (approx.):16x18x10; Pressurefree Operation:16; Nominal Resistance:18; Maximum Axial Force At Standstill:10; Voltage:16 mm; Control Fluid Drain:18 mm; Maximum Torque:10 mm; Power:0,1 mm; Maximum Permissible Pilot Pressure:0,2 mm; Control Pressure Measurement:– mm; Load Pressure:0,0039 Kg; Rotary stiffness:12,9 kN; Determining Operating Characteristics:0.1 mm; Moment of inertia rotary group:0.6 mm; Case volume:0.2 mm; Sequence Valve:1 mm; Maximum Volume Flow:20 °; Drive Speed:f7; Flow:H7; Maximum rotational speed:12.9 kN; Rate Of Pressure Change:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV2-1X/068RJ15DMB Vane pump | Drive Power:PCM 161810 E; Maximum rotational speed:16x18x10; Control Fluid Drain:16; Pilot Pressure:18; Maximum Permissible Pilot Pressure:10; Moment of inertia rotary group:16 mm; Maximum Axial Force At Standstill:18 mm; Maximum angular acceleration:10 mm; Maximum Permissible Speed (limit Speed):0,1 mm; Case volume:0,2 mm; Drive Speed:– mm; Displacement, geometric, per revolution:0,0039 Kg; Torque:12,9 kN; Sequence Valve:0.1 mm; Determining Operating Characteristics:0.6 mm; Nominal Resistance:0.2 mm; Voltage:1 mm; Load Pressure:20 °; Control Pressure Measurement:f7; Pressurefree Operation:H7; Maximum Volume Flow:12.9 kN; Weight (approx.):40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV2-1X/045RA15UMB Vane pump | Control Fluid Drain:PCM 161810 E; Determining Operating Characteristics:16x18x10; Pilot Pressure:16; Maximum Torque:18; Maximum Permissible Speed (limit Speed):10; Maximum rotational speed:16 mm; Rate Of Pressure Change:18 mm; Displacement, geometric, per revolution:10 mm; Drive Power:0,1 mm; Maximum Volume Flow:0,2 mm; Control Pressure Measurement:– mm; Case volume:0,0039 Kg; Weight (approx.):12,9 kN; Torque:0.1 mm; Pressurefree Operation:0.6 mm; Sequence Valve:0.2 mm; Moment of inertia rotary group:1 mm; Flow:20 °; Load Pressure:f7; Rotary stiffness:H7; Maximum Axial Force At Standstill:12.9 kN; Drive Speed:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV1-1X/027RA15DMB Vane pump | Control Fluid Drain:PCM 161810 E; Weight (approx.):16x18x10; Maximum Permissible Speed (limit Speed):16; Nominal Resistance:18; Drive Speed:10; Load Pressure:16 mm; Maximum Volume Flow:18 mm; Case volume:10 mm; Rate Of Pressure Change:0,1 mm; Voltage:0,2 mm; Maximum rotational speed:– mm; Maximum angular acceleration:0,0039 Kg; Determining Operating Characteristics:12,9 kN; Control Pressure Measurement:0.1 mm; Rotary stiffness:0.6 mm; Pilot Pressure:0.2 mm; Displacement, geometric, per revolution:1 mm; Maximum Axial Force At Standstill:20 °; Moment of inertia rotary group:f7; Torque:H7; Power:12.9 kN; Sequence Valve:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV1-1X/040RA15DMB Vane pump | Weight (approx.):PCM 161810 E; Maximum Permissible Pilot Pressure:16x18x10; Pressurefree Operation:16; Rotary stiffness:18; Power:10; Drive Speed:16 mm; Displacement, geometric, per revolution:18 mm; Maximum Permissible Speed (limit Speed):10 mm; Flow:0,1 mm; Control Pressure Measurement:0,2 mm; Maximum Volume Flow:– mm; Case volume:0,0039 Kg; Pilot Pressure:12,9 kN; Voltage:0.1 mm; Torque:0.6 mm; Maximum Torque:0.2 mm; Nominal Resistance:1 mm; Maximum Axial Force At Standstill:20 °; Load Pressure:f7; Determining Operating Characteristics:H7; Maximum angular acceleration:12.9 kN; Control Fluid Drain:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV2-1X/040RA15DMB Vane pump | Flow:PCM 161810 E; Sequence Valve:16x18x10; Load Pressure:16; Weight (approx.):18; Control Pressure Measurement:10; Pilot Pressure:16 mm; Control Fluid Drain:18 mm; Voltage:10 mm; Torque:0,1 mm; Rate Of Pressure Change:0,2 mm; Case volume:– mm; Power:0,0039 Kg; Displacement, geometric, per revolution:12,9 kN; Rotary stiffness:0.1 mm; Maximum rotational speed:0.6 mm; Determining Operating Characteristics:0.2 mm; Maximum Permissible Speed (limit Speed):1 mm; Maximum Permissible Pilot Pressure:20 °; Nominal Resistance:f7; Maximum angular acceleration:H7; Drive Speed:12.9 kN; Moment of inertia rotary group:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV1-1X/016RA15DMB Vane pump | Maximum Volume Flow:PCM 161810 E; Voltage:16x18x10; Maximum Axial Force At Standstill:16; Maximum Torque:18; Case volume:10; Torque:16 mm; Rotary stiffness:18 mm; Displacement, geometric, per revolution:10 mm; Pilot Pressure:0,1 mm; Control Pressure Measurement:0,2 mm; Maximum Permissible Speed (limit Speed):– mm; Moment of inertia rotary group:0,0039 Kg; Load Pressure:12,9 kN; Drive Power:0.1 mm; Flow:0.6 mm; Sequence Valve:0.2 mm; Determining Operating Characteristics:1 mm; Maximum Permissible Pilot Pressure:20 °; Power:f7; Weight (approx.):H7; Maximum angular acceleration:12.9 kN; Drive Speed:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
| Rexroth PVV2-1X/068RA15DMB Vane pump | Drive Speed:PCM 161810 E; Maximum Torque:16x18x10; Case volume:16; Power:18; Rate Of Pressure Change:10; Weight (approx.):16 mm; Determining Operating Characteristics:18 mm; Drive Power:10 mm; Pressurefree Operation:0,1 mm; Moment of inertia rotary group:0,2 mm; Load Pressure:– mm; Nominal Resistance:0,0039 Kg; Torque:12,9 kN; Flow:0.1 mm; Maximum Volume Flow:0.6 mm; Maximum Permissible Speed (limit Speed):0.2 mm; Sequence Valve:1 mm; Maximum Permissible Pilot Pressure:20 °; Maximum rotational speed:f7; Maximum Axial Force At Standstill:H7; Rotary stiffness:12.9 kN; Control Fluid Drain:40 kN; Specific dynamic load factor K:80 N/mm²; Specific static load factor K0:250 N/mm²; Factor depending on material and bearing type KM:480; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2 m/s; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.25; Mass bushing:0.0039 kg; |
Contact Us
- ShanDong Manufacturing CO., LTD.
- AddressLiXia District, Jinan City, Shandong Province, China
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Technical Articles
| How do you test the flow of a hydraulic pump? |
| Which pump has highest volumetric efficiency? |
| Why are hydraulic cylinders cushioned? |
Rexroth Vane pump CATEGORIES
- Danfoss Shut-off valves
- Rexroth Piston Pump
- DENISON vane pump
- PAKER Piston Pump
- Yuken pressure valve
- Yuken Piston pump
- Yuken Double Vane pump
- Yuken single Vane pump
- Rexroth Vane pump
- Rexroth Solenoid directional valve
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Rexroth check valve
- HYUNDAI injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump
Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump
Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump
Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump